The Macintosh Plus computer was the third model in the Macintosh line, introduced on January 16, 1986, two years after the original Macintosh and a little more than a year after the Macintosh 512K, with a price tag of 2599 USD. As an evolutionary improvement over the 512K, it introduced RAM expansion from 1 MB to 4 MB, and the SCSI peripheral bus, among smaller improvements. It originally had the same generally beige-colored case as the original Macintosh (“Pantone 453”), but in 1987, the case color was changed to the long-lived, warm gray “Platinum” color.
Read More...The SuperElf single-board computer was made by Quest Electronics. It was an improvement of the Netronics Elf and Elf II training boards, also based on the RCA 1802, one of the first RISC microprocessors.
The board also featured an 1861 video chip that was closely tied to the 1802 to generate a video image of 128×64 dots.
2, 4 or 6 7-segment Led display could be used. Its hexadecimal keyboard allowed programs to be entered and controlled more efficiently thanks to 8 function keys:
Read More...The S100 Computer System
I have been interested in S100 systems ever since i was a young lad of age 14. So I have re kindled my interest in them in the last few years. I had join a computer group called the N8VEM back in early 2000 and built a Z80 system off there. and then I found out about the s100 Computers.com group about 3 years ago
Read More...The 520ST was an all-in-one unit, similar to earlier home computers like the Commodore 64. By the time the 520ST reached the market, however, consumers demanded a keyboard with cursor keys and a numeric keypad. For this reason, the 520ST was a fairly large and awkward computer console.
Adding to this problem was the number of large cables needed to connect to the peripherals. This problem was addressed to some degree in the follow-on models which included a built-in floppy disk, though this addition resulted in the awkward placement of the mouse and joystick ports to a cramped niche underneath the keyboard.
Read More...The Replica was based around the front panel board designed and produced by Don Caprio. The S100 8080A Cpu board was designed by Josh Bensadon of Toronto Canada. It is connected to a S-100 Bus Console IO Board to provide VGA output. This board was designed by John Monahan of the “S100Computers.com” website.
Read More...